What is a polygel slip solution, and is it necessary?
Let’s find out.
In this article, we’ll clarify slip solutions.
If you have none, we’ll discuss how the polygel slip solution operates, its significance, and alternatives.
In a rush?
Here is the concise response:
Polygel slip solution is a polymer-thinning liquid. Sculpting polygel nails to the desired shape and thickness is simplified by dipping the brush in a slip solution. Typically, alcohol or ethyl acetate, both solvents, are the principal component of slip solution. If you do not have a slip solution, you can substitute it with rubbing alcohol, an acetone-free nail polish remover, or a gel base coat.
Okay, let’s now explore a little deeper.
How Does Slip Solution Function, And What Is It?
Slip solution functions as a solvent. It functions as a thinner.
You may have observed that when polygel is released from the tube, it is viscous, gloopy, and extremely adhesive.
Polygel slip solution essentially dilutes poly gel to make it more manageable.
It is essential to observe that poly gel slip solution only minimally thins the manicure gel.
Slip solution does not degrade poly gel to the extent that the nail’s structure is compromised.
Slip solution functions in the same manner as a monomer for acrylic nails.
The scent is a significant distinction between monomer and slip solution.
Monomer has a foul odor, whereas slip solution is odorless.
Some brands of anti-slip solutions even emit a fragrant aroma.
A slip solution makes the entire gel manicure procedure slicker, simpler, and faster.
What Components Make Up The Slip Solution?
Precise ingredients differ between manufacturers.
Nonetheless, the primary component of slip solution is typically a fast-drying alcohol, such as denat or isopropyl alcohol.
Ethyl acetate, a solvent, is another important component of a slip solution.
Most slip solutions are not irritating the skin; if this is a concern, you can purchase slip solutions free of harmful chemicals.
Instructions for using polygel slip solution
It is simple to use a poly gel slip solution.
Here are the subsequent steps:
1. Pour a small quantity of slip solution into a dish or glass.
2. Squeeze the polygel tube until a desired-sized mass rests on top.
3. Use the spatula end of your application instrument to transfer the gel to your nail plate’s dual form or point.
4. Clean the spatula, and then immerse the brush end of the application instrument into the polygel slip solution. (You can gradually add more liquid until you reach the desired consistency).
5. Sculpt the nail to the desired shape and thickness using a moist brush.
Once the solution has evaporated (which takes only a few seconds), you can cure your nail.
Polygel Slip Solution DIY
Can A Custom Polygel Slip Solution Be Created?
Why, sure you can!
Here is the most effective recipe for creating a slip solution at home.
What You Require:
• 1 x cup of water • 2 tablespoons of dish detergent (Dawn works well) • 3 teaspoons of vegetable glycerin
How To Prepare:
1. Combine the water, dish detergent, and glycerin in a basin until thoroughly blended.
2. Pour the solution into an airtight plastic or glass jar/bottle.
3. Shake it before each use.
4. Consider that water will evaporate considerably more slowly than alcohol.
What Can I Substitute The Slip Solution With?
Do not fret if you run out of slip solution or if your polygel manicure kit did not include one.
There are some excellent options that you may already have at home.
Below are some of the alternatives to slip solutions that people have attempted, along with information on whether or not they work.
Can Alcohol Be Substituted For Slip Solution In Polygel?
Yes! Alcohol is the primary component of many anti-slip solutions, so using it as a substitute makes sense.
Greater percentages are better.
For it to be effective, a minimum of 70% alcohol is required.
Alcohol for cleaning is optimal. Some manicure technicians prefer it over a slip solution!
If you have vodka or a similar spirit that contains 70% alcohol, you can also use it.
Can Acetone Be Substituted For Slip Solution In Polygel?
Never utilize acetone as a poly gel slip solution!
Acetone is utilized to eliminate polygel.
If you use acetone as a slip solution, the gel will dissolve excessively, leaving you with a watery, disgusting mass!
Can Nail Polish Remover Be Used As An Anti-slip Solution For Polygel?
Since most nail cosmetics contain acetone, they are ineffective as alternatives to slip solutions for poly gel nails.
In a hurry, a nail varnish remover without acetone will suffice as a substitute for a slip solution.
Can Isopropyl Alcohol Be Used?
Yes, isopropyl alcohol (rubbing alcohol) is an effective anti-slip agent.
Some prefer to apply their manicures with isopropyl alcohol rather than an adhesive solution.
90% and above will yield the greatest results, but anything above 70% volume will be satisfactory.
Are Slip Solution And Acrylic Liquid The Same?
Even though the slip solution is to polygel nails, what monomer is to acrylics, the two are not identical.
The chemical composition of monomer and slip solution are opposed.
As a result, it is not advisable to use a liquid monomer as a slip solution for polygel nails.
It may simplify application, but it will not reduce the adhesion, and your nails will be more prone to lifting.
If you have access to rubbing alcohol, using it is preferable.
Can Basecoat Be Used As A Slip Solution?
Certain basecoats can serve as slip solutions.
Your base coat must be compatible with your poly gel (the same brand is preferable).
Then, pour a small amount of the base coat into a dish and immerse the paintbrush as you would with any other slip solution.
What Is The Optimal Anti-slip Treatment For Polygel?
Forget about polygel brands with their expensive ingredients and packaging.
Isopropyl alcohol 99% is the finest anti-slip solution for polygel nails (click to verify price).
So many do-it-yourselfers who ran out of slip solution have discovered that rubbing alcohol works better for them.
Therefore, to avoid headaches, take some simple but effective isopropyl alcohol.
The link provided above is for a 99% formula ideal for gel manicure preparation and cleansing and sterilizing cosmetic implements (such as nail and makeup brushes).
Final Thought:
Let’s briefly summarize what we’ve learned.
Polygel slip solution aids in the application of polygel nails.
Many alternatives to slip solutions can be used in an emergency if you run out or have none available.
The ideal replacement for polygel slip solution is isopropyl alcohol (99%).
Alcohol is the primary component of many anti-slip solutions, so using it as a substitute makes sense.
Isopropyl alcohol is a suitable replacement for polygel cuticle application as a slip solution.
You may also use nail varnish remover, but ensure it does not contain acetone.
Basecoat can also be a slip remedy if compatible with the poly gel.
Using liquid monomer as a slip solution for poly gel nails is not a good idea, as it can increase the likelihood that the nails will elevate.
You found this polygel slip solution informative and entertaining post.
Enjoy nailing!